How to operate the vacuum packaging machine

by admin

What are the specific operation steps

1 turn on the power: turn the power selection switch as needed, that is, the power indicator is on The power selection switch points to vacuum for vacuum sealing, and points to vacuum inflation for vacuum inflation sealing. 2 place the plastic bag containing the articles in the vacuum chamber The opening of the bag shall be neatly placed on the heat seal (if it is used for inflatable packaging, at least one nozzle shall be inserted into the opening of the bag). 3 press down the machine cover and the air extraction (vacuum) indicator on the panel is on When the vacuum pump starts pumping, the machine cover is automatically sucked. The vacuum pumping knob can adjust the vacuum degree according to the packaging requirements. During the adjustment, the range should be small according to the scale from low to high. 4 when the air extraction reaches the set time (i.e. the required vacuum), the air extraction ends, the air extraction indicator light goes out and the inflation indicator light is on to indicate the beginning of inflation The inflation knob can adjust the inflation time (i.e. the amount of inflation), and the method is the same as above If inflation is not required Turn the power switch to the vacuum position, the program will automatically enter the vacuum packaging, and the inflation indicator will go out. 5 when the air extraction or inflation is completed, the indicator light goes out and the heat sealing indicator light goes on, that is, the sealing procedure is entered. The panel is equipped with heat sealing time and temperature adjustment knob to adapt to different thickness materials. When adjusting the time and temperature, the rotation range should be small to prevent the sudden increase of heat sealing temperature and burning of heat sealing accessories. 6 when the set heat sealing time is reached, the heat sealing indicator light goes out to see the end of the heat sealing, that is, the vacuum chamber enters the atmosphere through the solenoid valve until the machine cover is lifted automatically, and the vacuum inflatable packaging process is completed, ready for the next packaging cycle.

it depends on the model of your packaging machine. The specific operation steps
1. Turn on the power supply and turn the power selection switch as needed, that is, the power indicator light is on
2. Place the plastic bag containing articles in the vacuum chamber, and place the bag mouth neatly on the heat seal
3. Press down the machine cover, and the air extraction (vacuum) indicator light on the panel is on. When the vacuum pump starts pumping, the machine cover is automatically sucked. The vacuum pumping knob can adjust the vacuum degree according to the packaging requirements. During the adjustment, the range should be small according to the scale from low to high
4. Bag the products that need vacuum packaging, then put the open end on the sealing strip and pay attention to keeping the bag straight. If it is small bag packaging, you can also pack multiple bags side by side at the same time
5. When the pumping reaches the set time (i.e. the required vacuum), the pumping ends, the pumping indicator light goes out and the inflation indicator light goes on to indicate the beginning of inflation. The inflation knob can adjust the inflation time (i.e. the amount of inflation), and the method is the same as above. If inflation is not required, turn the power switch to the vacuum position, the program will automatically enter the vacuum packaging, and the inflation indicator light will go out
6. After air extraction or inflation, the indicator light goes out and the heat sealing indicator light goes on, that is, the sealing procedure is entered. The panel is equipped with heat sealing time and temperature adjustment knob to adapt to different thickness materials. When adjusting the time and temperature, the rotation range should be small to prevent the sudden increase of heat sealing temperature and burning of heat sealing accessories
7. When the set heat sealing time is reached, the heat sealing indicator light goes out to see the end of the heat sealing, that is, the vacuum chamber enters the atmosphere through the solenoid valve until the machine cover is lifted automatically, and the vacuum inflatable packaging process is completed, ready for the next packaging cycle.

Related Articles

Leave a Comment